Beer Brewing & Wineries

Liquidus - Small 3-Speed Circulating Pump

Liquidus Pumps represent our value line of circulating pumps with very similar design and performance specs to better known equivalents like Taco, B&G, and Grundfos. These pumps are suitable for most low pressure heating and cooling applications using water or glycol mixes. This design is most commonly used with boiler and radiant floor applications.

B&G - 36 GPM 3-Speed Low Head Cold/Hot Water Circulating Pump

B&G's NRF-22 flanged in-line system lubricated circulating pump was designed specifically for quiet operation in closed hydronic heating and cooling systems. The B&G NRF-22 pump is the only oil lubricated pump on the market; other pumps use water and water does not a good lubricant make!

This pump is approximately 30% more powerful than the Taco 007 size.

Ranco - Aquastat / Electronic Temperature Controllers

The Ranco ETC is a microprocessor-based family of temperature controls designed to provide on/off control for commercial heating, cooling, air conditioning and refrigeration applications. With its wide temperature range, one and two stage capability, selectable heating/cooling modes and multi-voltage input, the ETC is one of the most versatile temperature controls available.

B&G - Low Head Cold/Hot Water Circulating Pump (BG-NRF-22)

B&G's NRF-22 flanged in-line system lubricated circulating pump was designed specifically for quiet operation in closed hydronic heating and cooling systems. The B&G NRF-22 pump is the only oil lubricated pump on the market; other pumps use water and water does not a good lubricant make!

This pump is approximately 30% more powerful than the Taco 007 size.

Honeywell - Valve Actuators (Actuator Only)

The VU844 Valve Actuators, and VU52, VU53 and VU54 Valve Bodies, will control hot or chilled water in commercial HVAC equipment such as fan coil units, terminal reheat coils and convectors. These valves are humidity resistant and are suitable for use in condensing, non-corrosive environments.

Port-All Manifolds - Brass Manifolds For PEX

Our Port-All Manifolds provide an amazing value that's hard to beat! These manifolds are come standard with generously large Supply & Return ports, 1/2" PEX quick connect circuit ports, gauges to monitor temp and pressure, both circuit level and system level valves for maximum control and ease of maintenance, air vent, and fill/drain ports. It's never been easier to multi-task your water chiller to provide cooling to multiple heat exchangers and achieve climate control in multiple spaces!

Stainless Steel Shell & Tube Heat Exchangers

Our line of shell and tube heat exchangers come in a wide range of cooling capacities, from 1 Ton to 100 Ton. These units are sized specifically for our ChillX and Chillking line of water chillers, and provide the best combination of affordability, reliability, and efficiency. Among the most important differentiators of these shell and tube heat exchangers, include: 316L grade stainless steel and all welded construction, helix tubing, and large ports for maximum flow.

Titanium Shell and Tube Heat Exchangers (Opposing-Side & Same-Side)

Just like our line of stainless steel shell and tube heat exchangers our titanium models also come in a wide range of cooling capacities from 1 Ton to 25 Ton, and heating capacities from 4 to 375 Ton! Our titanium heat exchangers are fully constructed with titanium shell and corrugated titanium interior tubes, ensuring adequate turbulence and avoiding inefficient laminar flows. These heat exchangers are sized and optimized specifically for our ChillX and Chillking line of glycol chillers, and offer the best available corrosion resistance for greatest longevity.

ChillX - 1.5-10 Ton Commercial Process Chillers With-out Reservoir

These inline/process chillers are available from 2 - 10 ton and offer a compelling cooling solution unique to the industry. Models without a cabinet do not have a reservoir or pump while models with 12" cabinet include a built-in pump but no reservoir. Accordingly, if you choose a unit with-out cabinet you'll need to supply an outside pump source and your own reservoir. Units with cabinet will still require an outside reservoir.

ChillX - Compact Water Chiller

This super efficient, quiet, and impressively compact chiller system was specifically designed for the hydroponic and brewing industries. These units are built to the highest standard, right here in the USA!

A great deal of research, engineering, and creativity goes into every product we offer. Built in the USA by expert craftsman, our chillers are custom designed by a team of engineers with decades of experience in all manner of commercial refrigeration applications. You won't find a more thoughtfully considered chiller solution anywhere else.