ChillX - 6 - 20 Ton Dual-Circuit Vertical Chillers

Title:
ChillX - 6 Ton Dual-Circuit Vertical Chiller (208/230V 1-Phase)
Images
ChillX - 6 - 20 Ton Dual-Circuit Vertical Chillers
ChillX - 6 - 20 Ton Dual-Circuit Vertical ChillersChillX - 6 - 20 Ton Dual-Circuit Vertical Chillers
Price: 
$14,594.00

SKU:
CXVA0072CRD1
Product Dimensions: 
82 × 35 × 64.74 in
1500 lb
Operating Temp: 
Regular Temp (55F LWT)
Refrigerant: 
R410A
Product Family: 
Product Certifications: 

Description & Overview 

Our ChillX Dual-Compressor Vertical Commercial Chillers come in capacities from 6-20 Ton and include all of our premium features by default, resulting in the best performance profile in our line as well as the added efficiency and redundancy afforded by a multi-circuit system. These commercial grade units also offer several optional upgrades, including:

  • Expansion Ports: Allows addition of 2-3X original chiller capacity by adding less expensive process chiller expansion module(s) as needed. This is a great feature for businesses in the process of bootstrapping, where scaling production in phases is especially attractive, or where eventual capacity requirements are unclear.
  • Redundant Pump: For a small up-charge we can add a second pump to provide redundancy in the unlikely event of a primary pump failure.
  • Hot Gas Recovery: An innovative design feature which recovers otherwise wasted heat from the refrigeration cycle which can then be stored in a facility boiler or water heater for use in other processes, or coupled with our dehu enabled air handlers to maximize de-humidification capacity with a neutral temp.
  • Low Temp: While all of our units can achieve much lower than 55F, our LT chillers are optimized to achieve Low Temp (25-28F) as efficiently as possible.

ChillX Vertical Chillers are custom designed and manufactured by expert craftsman at our facility in Central Texas. These chillers range in capacity from 6 to 20 tons and offer an array of options and essential features, such as: auto fill mechanism on all self-contained-chiller models with built-in pump and insulated stainless steel reservoirs, custom designed and hand-built evaporator coils & reservoirs, and optional water distribution manifolds constructed to meet your exact needs. These distribution manifolds dramatically reduce the typical manifold footprint, can fit in a cabinet 30"W X 19"H X 12"D, and can be built to serve up to ten pieces of equipment from a single manifold!

Evaporator In Tank

Units equipped with our stainless steel reservoir have our custom evaporator coil assembled right in the tank, with no internal welds offering unparalleled performance, longevity, and serviceability. Many of our coil and reservoir design elements are unique to us, and serve to maximize the refrigeration circuit and drastically improve water flow around the evaporator in order to attain maximum heat exchange.

Electrical

ChillX uses nothing but UL approved components in our systems. These systems can be built to accommodate almost any power supply required: single phase or three phase 208/230V, three phase 460/480V or 575V-600V, and other less common options may be available on request.

Temperature Controller and Circuit

The temperature control circuit is wired using the dependable and versatile RANCO controller. This unit can be wired 24V, 120V, or 240V, with options for single or multi-circuit use as well.

Refrigeration

Our ChillX Chillers use only the best of components in the refrigeration circuit. All of our Horizontal, Vertical, Process, and Remote chillers have Copeland compressors with a suction filter and liquid dryer that ensure many years of efficient, and dependable service.

Specifications 

  • 72,000 BTU/HR at 95F degree ambient and 55F degree water out
  • Electrical: 208/230V, 60hz single-phase
  • Minimum Circuit Ampacity: 48, Maximum Fuse Size 63 Amps
  • (1) Built-in 137 gallon stainless steel cooling reservoir with "No-freeze" evaporator coil inside
  • (1) 1 HP water pump: 47 GPM max, 49 PSI max
  • R410a Refrigerant
  • (2) Copeland scroll compressor
  • Approximate shipping weight 1500 LBS
  • Dimensions: 35" wide, 82" long, 64-3/4" tall
  • Decibels: 74

Product Manufacturer 

ChillX Chillers

ChillX Premium Water Chillers

ChillX premium water chillers are built using the highest quality components, including stainless steel reservoir, 1/2" foam insulation, and custom refrigeration evaporators manufactured in-house. Every ChillX water chiller is load tested and must produce at least 110% of the BTU rating for that system -- guaranteed! Our custom evaporators are as much as 20% more efficient than any other chiller on the market today!

A great deal of research, engineering, and creativity goes into every product offered by ChillX. Built in the USA by expert craftsman, ChillX chillers are custom designed by a team of engineers with decades of experience in all manner of commercial refrigeration applications. You won't find a more thoughtfully considered chiller solution anywhere else.

CHILLX Premium Water Chillers

The Most Efficient cooling solutions
optimized
For Your Environment.

Request A Quote

We Offer FREE Design Assistance!

Need help sizing your project? Need some grow room design ideas or chiller configurations for brewery or winery applications? Not sure where to start? Well, we can help! Please provide a few details and one of our design engineers will reach out soon to discuss your project.

Related Items

ChillX - 20 - 40 Ton Vertical Self-Contained Quad-Circuit Chillers
ChillX - 15 - 30 Ton Vertical Self-Contained Chiller
ChillX - 1.5 - 12 Ton Vertical Extra Low Temp Chillers
ChillX - 2-5 Ton Low Profile Low Temp Self-Contained Chillers (Single Circuit Models)ChillX - 2-5 Ton Low Profile Low Temp Self-Contained Chillers (Single Circuit Models)
ChillX - 2-10 Ton Vertical Chillers (Single Compressor)
ChillX - 2 & 5 Ton Budget Vertical Chillers